Restrictor stay hinge
-
★1. When the telescopic support is installed in different positions, the opening distance of the hanging window is different.
According to the standards of doors and Windows in China, the opening distance of hanging Windows should be controlled within 300mm,
So should be installed as close as possible to the lower side of the position is appropriate.
Note: After installation, the knob of the card slot faces up.
- 24小时服务热线：
- 400-1788-636
Installation diagram of the LE-10
1) telescopic support installation, should ensure that the installation position of both sides as far as possible, the deviation is not more than 1mm;
2) when the height of the window sash is not more than 1m, telescopic support can be installed;
3) telescopic support should be avoided as far as possible in the high-rise and the wind speed is too large area, such as the seaside; .
4) When the hanging window is unattended, it should be ensured that it is in a closed state. When the wind is strong, ensure timely closure.
★2, about the use of telescopic support: telescopic support is fixed, first push the window sash outward, when pushed to the maximum position, and then pull back, then there will be a "cluck" sound, indicating that it has been locked. When closing the sash, first push the sash outwards, out of the locking position, and then pull the sash in the closing direction until the sash closes.
★3, about the use of telescopic support card piece:
When there is basically no wind pressure danger outside, you can use the card. After the telescopic support is pushed to the open position, the card position piece can be pushed into the groove by manual method to prevent the telescopic support from suddenly bouncing back. It can be said that the card position piece is an insurance device. Because the telescopic support itself is already a locking support, so the card is only an auxiliary device. The method of using the card bit is shown in the figure on the right.
